Fuselage Misc Items

The goal by end of the year is to get the turtle-deck riveted. So we are slowly making progress to get things done in the aft fuselage.

 

First, took care of the rubbing rudder cables by using adel clamps and plastic tubings (1 hr):

 

 



Note that the wiring for VOR cable is also taken care off (0.5 hrs) and is neatly tucked under and out of the way of rudder cables.

Similarly, the ELT wiring is tied neatly and routed through the fuselage below (1 hr). Once all this was done, we then started to take things apart in order to get ready for the turtle-deck riveting. Below you can see an image with Autopilot and the bell-crank disassembled.